Get Creative

Get Creative

Personalize your sneakers and stand out in the crowd!

By using the Tarrago Sneakers Paint you can customise your sneakers yourself.

Tarrago Sneakers Paint is a water-based colour dye specially formulated to change the colour, customize or restore your smooth leather, synthetic leather or canvas sneakers. Thanks to its high concentration of quality pigments, it has an exceptional hiding power. It offers a superior resistance to wet/dry friction and flexions, preventing the dye from cracking. Satin/Matt finish.

To improve the strength of this finish, apply Sneakers Paint Neutral Base, and then the Sneakers Matt Maker for a matt finish or Sneakers Gloss Maker for a glossy finish. Fast drying.


Instructions For Use

1. Clean the sneakers with the Sneakers Cleaner using the Sneakers Brush. For best dyeing results, use the Conditioner. 

2. Before painting, stir the content with the brush enclosed, until a homogeneous colour is obtained.

3. Customize your Kicks:
3.1. Use the sponge included to cover larger surfaces. With the semi-wringing paint brush, paint one corner of the sponge and gently rub over with circular moves on your sneakers.
3.2. Use the Paint Brush included for small details or customization.
3.3. Use an Airbrush, see the instructions inside airbrush box. Use the neutral base, to dilute the dye and maintain its properties. The applications must be very light. It is better to apply several thin layers than a single thick layer.
After drying the first layer of paint (1-3 minutes), apply a second layer if it is necessary, repeating the operation to match the entire color. To accelerate the dyeing process between layers, use a hair dryer with caution (30 cm. minimum distance). IMPORTANT: For Fluro Colours and Metallic Colours, apply the Standard Colour Paint No. 1 (White) first, to achieve a better result.

4. For optimum drying, let it dry for 12 hours.

5. Once the process is finished, wash the sponge, the Paint Brush or the Airbrush with water to prevent them from drying out.

Sneakers Paints can be mixed between them by using the included dossing cap to achieve the desired tone, examples:
Orange: 2 parts yellow and 1 part magenta
Violet: 2 parts magenta and 1 part cyan
Green: 2 parts cyan and 1 part yellow
To make the colour more resistant, you can apply the Sneaker Paint Neutral Base.

Apply the Sneakers Gloss Maker (for a glossy result) or the Sneakers Matt Maker (for a matt result) according to the desired finishing touch.